ABSTRACT
Objective:To investigate the clinical significance of a new classification system for atlas fractures based on pre- and post-treatment CT features, with a focus on diagnosis and treatment.Methods:A retrospective analysis was conducted on 75 cases of cervical vertebra fractures treated at the Sixth Hospital of Ningbo City between January 2015 and December 2020. The study included 44 males and 31 females, with an average age of 53.3±13.0 years (range: 27-81 years). The fractures were classified according to the Landells classification, resulting in 12 cases of type I, 13 cases of type II, 33 cases of type III, 9 cases that were difficult to classify due to fracture lines located at anatomical junctions, and 8 cases that could not be classified using the Landells classification due to diverse injury mechanisms. To establish a new preliminary classification for cervical vertebra fractures, the researchers considered whether the fracture line in the CT images involved the facet joint surface of the atlas, the impact on bilateral half-rings, and the displacement distance of the fracture ends. Five spinal surgeons were randomly selected to classify the CT images of the 75 patients using the new classification method. After one month, the imaging data of the 75 cases of cervical vertebra fractures were randomized and reclassified to assess the reliability and repeatability of the classification.Results:The new cervical vertebra fracture classification method comprised three types based on whether the fracture line involved the facet joint surface of the atlas: type A (no involvement of the facet joint surface of the atlas), type B (involvement of one side of the facet joint surface with intact contralateral half-ring), and type C (involvement of one side of the facet joint surface with fractured contralateral half-ring). Additionally, based on the maximum displacement distance between the fracture ends (>4 mm), six subtypes were identified: subtype 1 (≤4 mm displacement) and subtype 2 (>4 mm displacement). Consequently, the subtypes were classified as A1, A2, B1, B2, C1, and C2. According to the new classification method, the 75 patients included 17 cases of A1, 12 cases of A2, 7 cases of B1, 13 cases of B2, 12 cases of C1, and 14 cases of C2. The classification demonstrated excellent consistency, as assessed by the five doctors, with Kappa values of 0.85 and 0.91 for reliability and repeatability, respectively. At the final follow-up, all conservatively treated patients achieved bone healing, while four surgically treated patients experienced non-union of the fracture ends but exhibited good fusion between the atlas and axis. The remaining surgically treated patients achieved bony union without complications such as loosening or fracture of internal fixation.Conclusion:The new cervical vertebra fracture classification method, based on CT imaging features, comprehensively covers common clinical cases of cervical vertebra fractures and demonstrates excellent consistency. It provides valuable clinical guidance for the diagnosis and treatment of cervical vertebra fractures.
ABSTRACT
Objective:To investigate the safety of posterior atlantoaxial transarticular screw combined with atlas pedicle screw fixation in Chinese.Methods:CT data of upper cervical spine in 48 patients were collected from Ningbo No.6 Hospital, including 26 males and 22 females aged 26-58 years [(37.3±13.5)years]. All CT data was transformed into 3D dimensional model and inserted with virtual screws by Mimics 19.0. Firstly, the vertical plane P 1 and the horizontal plane P 2 of the atlas were built in those atlantoaxial models, secondly the atlantoaxial transarticular screw S 0 was inserted by Margel method, and it's insertion point was located at 3 mm lateral and 2 mm cephalad in the C 2 inferior articular process. Finally, four atlas pedicle screws were inserted at the midline of atlas lateral mass. The four screws are inserted as follows. S 1: the screw was tangent to the lateral side of the S 0 or the medial of the atlas pedicle. S 2: the screw was tangent to the lateral wall of the atlas pedicle. S 3: the screw was tangent to the upper wall of the atlas pedicle. S 4: the screw was tangent to the inferior wall of the atlas pedicle. The angles between S 1, S 2 and P 1 as the camber angle, and the angle between S 3, S 4 and P 2 as the gantry angle were measured. Then the safety range of camber angle and gantry angle were calculated, and the screw length of S 1, S 2, S 3 and S 4 was measured. In all models, the camber angle and gantry angle of the screws were adjusted an interval of 2°, the number of successful cases was calculated and the success rate of insertion was calculated. Results:All 3D models were inserted successfully. The minimum value, maximum value and safety range of the camber angle of atlas pedicle screws were (-6.7±5.2)°, (10.4± 4.3)°, (17.1±3.7)°, respectively; and of the gantry angle were (-0.5±3.5)°, (11.0±5.8)°, (11.5±4.9)°, respectively. The length of screw placement was S 1: (31.1±2.4)mm, S 2: (28.3±2.5)mm, S 3: (29.2±3.8)mm, S 4: (29.6±3.0)mm, respectively ( P<0.05). When the camber angle was from -1°to 5°, the success rate of screw placement was 87.5%; when inserting with 2° camber angle, the success rate was 100%; when the gantry angle was 5°, the success rate was 93.8%. Conclusion:The posterior atlantoaxial transarticular screw combined with atlas pedicle screw can achieve satisfy insertion length and success rate.
ABSTRACT
Objective@#To investigate the efficacy of microscope-assisted free-hand atlantal pedicle screw technique for unstable atlas burst fracture.@*Methods@#A retrospective case control study was conducted to analyze the clinical data of 48 patients with unstable atlas burst fracture admitted to Ningbo No.6 hospital from January 2016 to June 2018. There were 32 males and 16 females, aged 24-72 years [(49.5±15.2 years)]. A total of 22 patients were treated with the technique of atlas screw placement by drill under microscope (Group A), including 14 males and eight females, aged 24-68 years. Twenty six patients (Group B) were treated with atlantal pedicle screw placement by hand, including 18 males and 8 females, aged 26-72 years [(50.7±15.4 years)]. The operation time, intraoperative blood loss and the times of intraoperative fluoroscopy were compared between the two groups. X-ray and CT were reexamined to evaluate the accuracy of screw placement within one week after operation. The visual analogue score (VAS) and cervical dysfunction index (NDI) were compared before operation and 1 year after operation. The intraoperative complications were recorded. One year after operation, X-ray and CT were reexamined to observe fracture healing, atlantoaxial fusion and failure of internal fixation.@*Results@#Group A was followed up for 12-24 months [(18.4±6.8)months], and Group B for 12-24 months [(17.4±7.2)months]. The amount of intraoperative bleeding [(180.5±60.8) ml] and the times of intraoperative fluoroscopy [(1.3±0.8) times] in Group A were significantly lower than those in Group B [(280.1±80.2) ml, (2.2±0.8) times] (P<0.05), but there was no significant difference in the time of operation and the accuracy of screw placement (P>0.05). There were statistically significant differences in VAS and NDI before operation and one year after operation in both groups (P<0.05), but there was no significant difference between the two groups (P>0.05). No serious complications such as vertebral artery, nerve root and spinal cord injury occurred. One year follow-up CT showed healed fracture or continuous bone bridge passing through the atlantoaxial intervertebral space. Except for one patient in Group B with lost reduction, other patients had no loosening or fracture of internal fixation.@*Conclusion@#Compared with screw placement by hand, the pedicle screw placement by drill under the microscope can reduce the amount of bleeding and the times of fluoroscopy.
ABSTRACT
Objective@#To investigate the accuracy and feasibility of individual 3D printing model for pedicle screw placement in treating patients with upper cervical spine fracture.@*Methods@#A retrospective case control study was conducted to analyze the clinical data of 30 patients with upper cervical spine fracture admitted to Ningbo No.6 Hospital from August 2013 to December 2018. There were 19 males and 11 females, aged 45-67 years with an average age of 53.5 years. The 15 patients in the study group were treated with pedicle screw fixation and another 15 patients in the control group were treated with traditional freehand screw fixation. A total of 120 pedicle screws were implanted, with 60 screws in each group. The operation time, intraoperative blood loss, preoperative and postoperative visual analogue score (VAS), Japan Orthopedic Association (JOA) score were recorded. The position and grade of screws were evaluated according to Kawaguchi's evaluation method of screw grade after operation. The patients took monthly reexamination for the first three months after discharge. In the first two months after discharge, the patients took X-ray examination for observation of screw loosening or rupture of internal fixation. At the third month after operation, the patients took CT of cervical spine for observation of bone healing and fusion.@*Results@#The mean follow-up duration was 17.8 months (range, 13-21 months). The study group had shorter operation time (99.13±3.04)minutes compared with the control group (107.00±6.92) minutes (P<0.01). There were no significant differences in intraoperative blood loss, preoperative VAS, JOA scores before operation and 1 year after operation between the two groups (P>0.05), but the VAS in study group was significantly lower than that in control group (P<0.05). In the study group, the VAS score 1 year after operation [(2.3±0.5)points] was lower than that before the operation [(7.7±0.7)points], and the JOA score [(16.8±0.4)points] was significantly higher than that before the operation [(15.9±0.7)points](P<0.01). In the control group, the VAS 1 year after operation [(2.5±0.5)points] was significantly lower than that before operation [(7.5±0.5)points] (P<0.01), and the JOA score [(16.5±0.5)points] was significantly higher than that before operation [(15.9±0.8)points] (P<0.05). In the study group, according to the CT results, there were 28 atlas pedicle screws of grade 0 (93.3%), two of grade 1 (6.7%), 0 of grade 2, 0 of grade 3, and there were 27 axial pedicle screws of grade 0 (90.0%), three of grade 1 (10.0%), 0 of grade 2, and 0 of grade 3. In the control group, there were 25 atlas pedicle screws of grade 0 (83.3%), four of grade 1 (13.3%), one of grade 2 (3.4%), 0 of grade 3, and there were 27 axial pedical screws of grade 0 (90.0%), three of grade 1 (10.0%), 0 of grade 2, and 0 of grade 3. There was no significant difference in the accuracy of pedicle screw placement between the two groups (P>0.05). No serious complications such as spinal cord or vertebral artery injury occurred. At 3 months after operation, CT showed that the fracture of cervical vertebra healed.@*Conclusion@#Individualized 3D printed cervical spine model can guide the pedicle screw placement for upper cervical spine fracture, which can shorten the operation time, reduce the postoperative pain of patients, improve the accuracy of screw placement, and reduce the risks related to operation.
ABSTRACT
Objective@#To compare the clinical efficacy of posterior atlantoaxial screw-rod fixation combined with spinous process muscle-vessel complex bone graft or iliac bone graft for atlantoaxial instability.@*Methods@#A retrospective case-control study was conducted to analyze the clinical data of 56 patients with atlantoaxial instability admitted to the Sixth Hospital of Ningbo from September 2014 to October 2016. There were 35 males and 21 females, with the age range from 9 to 59 years [(50.3±3.2)years]. A total of 26 patients were treated with posterior atlantoaxial screw-rod fixation combined with spinous process muscle-vessel complex bone graft (complex group), while 30 patients were treated with iliac bone graft (ilium group). Patients showed different degrees of neck pain and limited neck activity preoperatively. X-ray films and three-dimensional CT examination of the cervical spine were taken before and after operation for evaluating the atlantoaxial reduction, bone graft fusion and internal fixation. The operation time, intraoperative bleeding, bone fusion time, visual analogue scale (VAS), Japanese Orthopaedic Association (JOA) score, atlantodental interval (ADI) and axial symptoms were compared between the two groups, and the complications were recorded.@*Results@#Both groups were followed up for 24-30 months, with an average of 27.4 months. In the complex group and the ilium group, the operation time was (2.21±0.25)hours and (2.72±0.26)hours (P<0.01); the intraoperative blood loss was (227.3±45.4)ml and (277.7±43.4)ml, respectively (P<0.05); the bone fusion time was (6.9±0.5)months and (8.1±1.8)months (P>0.05), respectively. In the complex group, the VAS was (5.45±0.69)points before operation, (2.64±0.51)points at the follow-up one month after operation, (0.91±0.7)points at the follow-up 12 months after operation, and (0.45±0.16)points at the follow-up 24 months after operation; and in the ilium group, the VAS was (5.18±0.75)points, (2.45±0.52)points, (1.27±0.19)points and (0.41±0.18)points correspondingly. In terms of VAS, there were significant differences before and after operation within each group (P<0.01), while there were no significant differences between the two groups at different time points (P>0.05). In the complex group, the JOA score was (10.82±0.35)points before operation, (12.73±0.65)points at the follow-up one month after operation, (15.18±0.61)points at the follow-up 12 months after operation, and (15.64±0.15)points at the follow-up 24 months after operation; and in the ilium group, the JOA score was (10.73±1.19)points, (13.01±0.63)points, (14.73±0.91)points and (15.55±0.51)points correspondingly. In terms of JOA score, there were significant differences between before and after operation within each group (P<0.01), while there were no significant differences between the two groups at different time points (P>0.05). In the complex group, the ADI was (2.28±0.59)mm before operation, (1.83±0.56)mm at the follow-up one month after operation, (1.71±0.56)mm at the follow-up 12 months after operation, and (1.59±0.67)mm at the follow-up 24 months after operation; and in the ilium group, the ADI was (2.23±0.60)mm, (1.80±0.18)mm, (1.67±0.69)mm and (1.62±0.53)mm correspondingly. In terms of ADI, there were significant differences between before and after operation within each group (P<0.01), while there were no significant differences between the two groups at different time points (P>0.05). The axial symptom scores were graded as excellent in 23 patients and good in three patients of the complex group while excellent in 21 patients and good in nine patients in the ilium group (P>0.05). There were no patients with spinal nerve injury caused by pedicle screw placement after operation. One patient in the ilium group had incision errhysis and recovered after dressing change, and other patients had no incision infection.@*Conclusions@#For atlantoaxial instability, posterior atlantoaxial screw-rod fixation combined with spinous process muscle-vessel complex bone graft or autogenous iliac bone graft can both achieve satisfactory clinical results. The spinous process-muscle-vascellum complex graft has less operation time and intraoperative bleeding than the autogenous iliac bone graft, which can be a feasible alternative operation.
ABSTRACT
Objective To compare the clinical efficacy of posterior atlantoaxial screw-rod fixation combined with spinous process muscle-vessel complex bone graft or iliac bone graft for atlantoaxial instability.Methods A retrospective case-control study was conducted to analyze the clinical data of 56 patients with atlantoaxial instability admitted to the Sixth Hospital of Ningbo from September 2014 to October 2016.There were 35 males and 21 females,with the age range from 9 to 59 years [(50.3 ±3.2) years].A total of 26 patients were treated with posterior atlantoaxial screw-rod fixation combined with spinous process muscle-vessel complex bone graft (complex group),while 30 patients were treated with iliac bone graft (ilium group).Patients showed different degrees of neck pain and limited neck activity preoperatively.X-ray films and three-dimensional CT examination of the cervical spine were taken before and after operation for evaluating the atlantoaxial reduction,bone graft fusion and internal fixation.The operation time,intraoperative bleeding,bone fusion time,visual analogue scale (VAS),Japanese Orthopaedic Association (JOA) score,atlantodental interval (ADI) and axial symptoms were compared between the two groups,and the complications were recorded.Results Both groups were followed up for 24-30 months,with an average of 27.4 months.In the complex group and the ilium group,the operation time was (2.21 ±0.25) hours and (2.72 ±0.26) hours (P ＜0.01);the intraoperative blood loss was (227.3 ± 45.4) ml and (277.7 ± 43.4) ml,respectively (P ＜ 0.05);the bone fusion time was (6.9 ±0.5) months and (8.1 ± 1.8) months (P ＞ 0.05),respectively.In the complex group,the VAS was (5.45 ± 0.69)points before operation,(2.64 ± 0.51)points at the follow-up one month after operation,(0.91 ± 0.7) points at the follow-up 12 months after operation,and (0.45 ± 0.16) points at the follow-up 24 months after operation;and in the ilium group,the VAS was (5.18 ± 0.75) points,(2.45 ± 0.52)points,(1.27 ± 0.19) points and (0.41 ± 0.18) points correspondingly.In terms of VAS,there were significant differences before and after operation within each group (P ＜ 0.01),while there were no significant differences between the two groups at different time points (P ＞ 0.05).In the complex group,the JOA score was (10.82 ± 0.35) points before operation,(12.73 ± 0.65) points at the follow-up one month after operation,(15.18 ±0.61) points at the follow-up 12 months after operation,and (15.64 ±0.15) points at the follow-up 24 months after operation;and in the ilium group,the JOA score was (10.73 ± 1.19) points,(13.01 ± 0.63) points,(14.73 ± 0.91) points and (15.55 ± 0.51) points correspondingly.In terms of JOA score,there were significant differences between before and after operation within each group (P ＜ 0.01),while there were no significant differences between the two groups at different time points (P ＞ 0.05).In the complex group,the ADI was (2.28 ± 0.59) mm before operation,(1.83 ± 0.56)mm at the follow-up one month after operation,(1.71 ± 0.56)mm at the follow-up 12 months after operation,and (1.59 ± 0.67)mm at the follow-up 24 months after operation;and in the ilium group,the ADI was (2.23 ± 0.60) mm,(1.80 ± 0.18) mm,(1.67 ± 0.69) mm and (1.62 ± 0.53) mm correspondingly.In terms of ADI,there were significant differences between before and after operation within each group (P ＜ 0.01),while there were no significant differences between the two groups at different time points (P ＞ 0.05).The axial symptom scores were graded as excellent in 23 patients and good in three patients of the complex group while excellent in 21 patients and good in nine patients in the ilium group (P ＞ 0.05).There were no patients with spinal nerve injury caused by pedicle screw placement after operation.One patient in the ilium group had incision errhysis and recovered after dressing change,and other patients had no incision infection.Conclusions For atlantoaxial instability,posterior atlantoaxial screw-rod fixation combined with spinous process muscle-vessel complex bone graft or autogenous iliac bone graft can both achieve satisfactory clinical results.The spinous process-muscle-vascellum complex graft has less operation time and intraoperative bleeding than the autogenous iliac bone graft,which can be a feasible alternative operation.
ABSTRACT
Objective To investigate the efficacy of microscope-assisted free-hand atlantal pedicle screw technique for unstable atlas burst fracture.Methods A retrospective case control study was conducted to analyze the clinical data of 48 patients with unstable atlas burst fracture admitted to Ningbo No.6 hospital from January 2016 to June 2018.There were 32 males and 16 females,aged 24-72 years [(49.5 ± 15.2 years)].A total of 22 patients were treated with the technique of atlas screw placement by drill under microscope (Group A),including 14 males and eight females,aged 24-68 years.Twenty six patients (Group B) were treated with atlantal pedicle screw placement by hand,including 18 males and 8 females,aged 26-72 years [(50.7 ± 15.4 years)].The operation time,intraoperative blood loss and the times of intraoperative fluoroscopy were compared between the two groups.X-ray and CT were reexamined to evaluate the accuracy of screw placement within one week after operation.The visual analogue score (VAS) and cervical dysfunction index (NDI) were compared before operation and 1 year after operation.The intraoperative complications were recorded.One year after operation,X-ray and CT were reexamined to observe fracture healing,aflantoaxial fusion and failure of internal fixation.Results Group A was followed up for 12-24 months [(18.4 ± 6.8)months],and Group B for 12-24 months [(17.4 ± 7.2) months].The amount of intraoperative bleeding [(180.5 ±60.8) ml] and the times of intraoperative fluoroscopy [(1.3 ±0.8) times] in Group A were significantly lower than those in Group B [(280.1 ± 80.2) ml,(2.2 ± 0.8) times] (P ＜ 0.05),but there was no significant difference in the time of operation and the accuracy of screw placement (P ＞ 0.05).There were statistically significant differences in VAS and NDI before operation and one year after operation in both groups (P ＜ 0.05),but there was no significant difference between the two groups (P ＞ 0.05).No serious complications such as vertebral artery,nerve root and spinal cord injury occurred.One year follow-up CT showed healed fracture or continuous bone bridge passing through the atlantoaxial intervertebral space.Except for one patient in Group B with lost reduction,other patients had no loosening or fracture of internal fixation.Conclusion Compared with screw placement by hand,the pedicle screw placement by drill under the microscope can reduce the amount of bleeding and the times of fluoroscopy.
ABSTRACT
Objective To investigate the accuracy and feasibility of individual 3D printing model for pedicle screw placement in treating patients with upper cervical spine fracture.Methods A retrospective case control study was conducted to analyze the clinical data of 30 patients with upper cervical spine fracture admitted to Ningbo No.6 Hospital from August 2013 to December 2018.There were 19 males and 11 females,aged 45-67 years with an average age of 53.5 years.The 15 patients in the study group were treated with pedicle screw fixation and another 15 patients in the control group were treated with traditional freehand screw fixation.A total of 120 pedicle screws were implanted,with 60 screws in each group.The operation time,intraoperative blood loss,preoperative and postoperative visual analogue score (VAS),Japan Orthopedic Association (JOA) score were recorded.The position and grade of screws were evaluated according to Kawaguchi's evaluation method of screw grade after operation.The patients took monthly reexamination for the first three months after discharge.In the first two months after discharge,the patients took X-ray examination for observation of screw loosening or rupture of internal fixation.At the third month after operation,the patients took CT of cervical spine for observation of bone healing and fusion.Results The mean follow-up duration was 17.8 months (range,13-21 months).The study group had shorter operation time (99.13 ± 3.04)minutes compared with the control group (107.00 ± 6.92) minutes (P ＜ 0.01).There were no significant differences in intraoperative blood loss,preoperative VAS,JOA scores before operation and 1 year after operation between the two groups (P ＞ 0.05),but the VAS in study group was significantly lower than that in control group (P ＜ 0.05).In the study group,the VAS score 1 year after operation [(2.3 ± 0.5) points] was lower than that before the operation [(7.7 ± 0.7) points],and the JOA score [(16.8 ± 0.4) points] was significantly higher than that before the operation [(15.9 ± 0.7) points] (P ＜ 0.01).In the control group,the VAS 1 year after operation [(2.5 ± 0.5) points] was significantly lower than that before operation [(7.5 ±0.5)points] (P ＜0.01),and the JOA score [(16.5 ±0.5)points] was significantly higher than that before operation [(15.9 ± 0.8)points] (P ＜ 0.05).In the study group,according to the CT results,there were 28 atlas pedicle screws of grade 0 (93.3％),two of grade 1 (6.7％),0 of grade 2,0 of grade 3,and there were 27 axial pedicle screws of grade 0 (90.0％),three of grade 1 (10.0％),0 of grade 2,and 0 of grade 3.In the control group,there were 25 atlas pedicle screws of grade 0 (83.3％),four of grade 1 (13.3％),one of grade 2 (3.4％),0 of grade 3,and there were 27 axial pedical screws of grade 0 (90.0％),three of grade 1 (10.0％),0 of grade 2,and 0 of grade 3.There was no significant difference in the accuracy of pedicle screw placement between the two groups (P ＞ 0.05).No serious complications such as spinal cord or vertebral artery injury occurred.At 3 months after operation,CT showed that the fracture of cervical vertebra healed.Conclusion Individualized 3D printed cervical spine model can guide the pedicle screw placement for upper cervical spine fracture,which can shorten the operation time,reduce the postoperative pain of patients,improve the accuracy of screw placement,and reduce the risks related to operation.
ABSTRACT
Objective To assess the effects of axial spinous process-muscle-vascellum complex transplantation for posterior atlantoarial fusion.Methods Data of 27 cases with altantoarial disease who were treated by posterior atlantoarial fusion using axial spinous process-muscle-vascellum complex transplantation from June 2015 to June 2016 were retrospectively analyzed.There were 19 males and 8 females aged from 9 to 68 years old (mean,41.0±15.4 years old).Two cases were diagnosed with atlanto-axial instability.Fourteen cases were diagnosed with atlas fracture and eleven cases were diagnosed atlanto-axial fracture.All the 27 patients suffered from neck pain or limitations of cervical motion.All patients were assessed clinically by atlantoaxial reduction and bone graft fusion.The pre-operative and post-operative atlanto-dens interval (ADI),visual analogue scale (VAS),Japanese Orthopaedic Association scores (JOA),improvement rate of JOA score and axial symptoms were measured and statistically analyzed.Complications were recorded.Clinical outcome of latest follow-up was evaluated by X-ray and CT scan.Results The time of operation was 2.0-2.5 h and blood loss was 150-300 ml.All the patients were followed-up for 9 to 18 months (mean,11.5±2.1 months).The VAS of neck pain improved from 3.6±2.7 (range,2.0-5.0) pre-operatively to 1.4±0.2 (range,0-2.0) 12 months postoperatively (P=0.000).The JOA score improved from 11.7± 1.9 (range,10.0-15.0) pre-operatively to 15.3±0.6 (range,14.0-17.0)12 months post-operatively (P=0.000).The improvement rate of JOA score at the latest follow-up was 54.1％± 12.4％,including 23 cases (85.19％) excellent,and 4 cases (14.81％) good.The results of axial symptoms were no-symptom in 22 cases (81.48％) and mild symptoms in 5 cases (18.52％).Postoperative cervical spine X-ray and CT showed that the sagittal cervical spine alignment was restored.There was statistically significant difference between ADI of 4.3±1.1 mm (range,3.9-4.5 mm) pre-operatively to 2.5± 0.4 mm (range,2.1-2.6 mm) 12 months post-operatively,which was improved significantly (P=0.000).There were no complications found during the follow-up.Conclusion The application of axial spinous process-muscle-vascellum complex transplantation for posterior atlantoaxial fixation can preserve the dynamic function of muscles and reduce the postoperative pain,as well as avoid donor site morbidity.
ABSTRACT
Objective To investigate the preliminary clinical application of anterior pedicle screws in treatment of the lower cervical spine injuries. Methods The study involved 22 patients with lower cervical spine injuries treated with anterior pedicle screw technique from January 2009 to December 2011.X-ray and CT images of the patients were taken postoperatively to evaluate whether the position,orientation and length of the screws were appropriate and whether there involved pedicle cortex perforation,transverse foramen or spinal canal invasion.MRI was also performed to ascertain the situation of decompression,the formation of epidural hematoma and the degeneration of cervical spinal cord.The improvement of JOA score was compared statistically. Results All the patients were followed up for 3-36 months ( mean,15.5 months).A total of 44 anterior lower cervical screws were implanted and all screws were inserted smoothly.All the patients had bone healing after average 4.5 months,which showed no loosening,prolapse or breakage of the screws or no loosening of the plate.One patient showed hoarseness postoperatively,which was probably due to the long-term distraction of recurrent laryngeal nerve.The symptom disappeared at around three weeks after neurotrophic support.Two patients complained of dysphagia postoperatively,and were informed of keeping a soft diet.The symptom was remarkably alleviated after three months or so.The X-ray films indicated satisfactory position of the implanted screws.Before discharge,the transaxial CT images showed that two screws perforated the medial pedicle cortex ( 1 ° ) and that two screws perforated the lateral cortex (1 °) and affected the medial margin of the transverse foramen.Before discharge,the MRI indicated obvious alleviation of the anterior spinal cord compression in all patients and a small amount of anterior epidural hematoma in four patients,with no obvious spinal cord compression.At 12 months after operation,the MRI showed significant improvement of spinal cord degeneration in three patients.JOA score was increased from preoperative (8.5 ± 0.7) to ( 14.5 ± 0.8 ) before discharge (P ＜0.01 ).JOA score was (15.7 ±0.7) at six months postoperatively,which was significantly improved as compared with that before discharge. Conclusions Anterior pedicle screw fixation is a reliable and safe method for reconstruction of the anterior lower cervical injuries.Surgical indications should be strictly controlled in its clinical application.
ABSTRACT
Objective To identify the feasibility and the anatomical parameters of posterior transarticular pedicle screw fixation in the thoracic spine, provide a reference for clinical applications. Methods Twenty human cadaveric thoracic spine segments were dissected posteriorly and anteriorly, with care taken to expose the laminas and pedicles. The entrance point of transarticular pedicle screws was located in the 7 mm away from the above at the inferior margin of the lamina and the inside at the exterior margin, respectively. Posterior transarticular pedicle screws implantation was performed under direct visualization into T1,2,T5,6 and T9,10 Under direct abservation, the feasibility of posterior transarticular pedicle screw fixation was assessed. Then a CT was done. On the morphologic CT scan, the angle and length of the transarticular pedicle crew trajectory were measured. Results The thoracic transarticular pedicle screw trajectory were caudal tilting in the sagittal plane and lateral tilting in the axial plane with successful placement. Screws were placed across the facet joint, and from the inferior articular process of upper thoracic vertebra into the pedicle of lower thoracic vertebra. There was little difference between different number of thoracic vertebrae of the angle, but without significance. The average angles of the screws were 41.4°+3.2°caudal tilting in the sagittal plane and 2.1°±0.7° lateral tilting in the axial plane. The average trajectory lengths were (40.6±4.9)mm, and the lengths increased gradually from upper thoracic vertebra to middle and lower. There were significant differences statistically among T1,2, T5,6 and T9.10 (F=74.09, P＜0.01 ). Conclusion Posterior transarticular pedicle screw fixation is feasible, and there are some directions for implantating the screws. Transarticular pedicle fixation in the thoracic spine affords an alternative to standard pedicle screw placement for thoracic stabilization.